Define the carrier around its mat and loop architecture

Give the supplier what is needed for a representative assembly.

Mat range
What to record: Smallest and largest rolled circumference, thickness and surface
Project detail: ____________________
How to confirm: Measure representative rolled mats

Loop architecture
What to record: Fixed, sliding or buckle-adjusted; routing and overlap
Project detail: ____________________
How to confirm: Mark on an assembly drawing

Carry geometry
What to record: Shoulder length, position and adjustment range
Project detail: ____________________
How to confirm: Fit boundary assemblies on intended users

Webbing contact
What to record: Mat face, exposed edge, twist and desired grip
Project detail: ____________________
How to confirm: Observe while walking and adjusting

Cut and joint
What to record: Cut length, seam take-up, fold direction and stitch zone
Project detail: ____________________
How to confirm: Open an approved assembly and compare

Declared use
What to record: Carry only or separately specified exercise function
Project detail: ____________________
How to confirm: Match packaging claims to the validation plan

Dimensions and acceptance belong to the mats and construction. Exercise use needs separate finished-product requirements; carrying does not establish training safety.

Sinicwebbing — https://www.sinicwebbing.com