Define a complete webbing watch-strap fit

Connect the watch hardware, two strap halves and worn condition.

Watch interface
Record: Watch reference, lug opening, spring-bar clearance and attachment route
Project detail: ____________________
Confirm: Trial on controlled watch or gauge

Strap halves
Record: Long/short side, finished width, cut length, holes and end treatment
Project detail: ____________________
Confirm: Compare paired drawing

Folded construction
Record: Layer count, fold length, seam position and finished thickness
Project detail: ____________________
Confirm: Measure completed lug and buckle ends

Keeper and tail
Record: Fixed/floating keeper dimensions, tail thickness and adjustment range
Project detail: ____________________
Confirm: Cycle through wrist settings

Wrist contact
Record: Skin-facing edge, seam, pressure points and dry/damp state
Project detail: ____________________
Confirm: Wear or use shaped wrist fixture

Pattern orientation
Record: Dial datum, motif start, face, left/right pairing and hidden area
Project detail: ____________________
Confirm: Inspect assembled top view

Dimensions and comfort acceptance are project-defined. Hardware references, wrist range and any skin-contact material requirements must come from the buyer.

Sinicwebbing — https://www.sinicwebbing.com