Record a post-sewing twist investigation

Keep tape orientation, assembly geometry and load path connected.

Symptom
Record: Twist direction, location, load state, timing and affected quantity
Project detail: ____________________
Confirm: Video from a fixed view

Loose-tape control
Record: Relaxed flatness, skew, edge shape, face and roll direction
Project detail: ____________________
Confirm: Compare unsewn labeled strip

Cut-piece orientation
Record: Face, left/right edge, cut direction, mirrored pair and bundle order
Project detail: ____________________
Confirm: Match marks to cutting plan

Seam geometry
Record: Overlap, stitch position, layer alignment, feed direction and puckering
Project detail: ____________________
Confirm: Measure both faces

Hardware path
Record: Model, entry face, wraps, anchor alignment and swivel freedom
Project detail: ____________________
Confirm: Compare approved routed assembly

Load observation
Record: Anchor points, direction, sequence and where rotation begins
Project detail: ____________________
Confirm: Apply repeatable product-use path

Acceptance should use the product’s intended worn or loaded orientation. Keep controls before dismantling so correction does not erase the evidence.

Sinicwebbing — https://www.sinicwebbing.com