Record the assembly by sewing zone

Connect materials, access, feeding and inspection to each trial zone.

Zone map
What to record: Straight run, corner, layer step and hardware approach
Project detail: ____________________
How to confirm: Number locations on the assembly drawing

Local stack
What to record: Layer order, folds, padding, binding and reinforcement
Project detail: ____________________
How to confirm: Compare marked sections with the trial

Tool access
What to record: Foot clearance, guide position and distance to attachments
Project detail: ____________________
How to confirm: Follow the full seam without forcing parts

Feed reference
What to record: Paired layer marks and intended seam margin
Project detail: ____________________
How to confirm: Compare alignment before and after sewing

Line setup
What to record: Machine, foot, guide, speed, needle, thread and sequence
Project detail: ____________________
How to confirm: Attach each trial’s dated setup

Inspection output
What to record: Skipped stitches, yarn damage, displacement and connection response
Project detail: ____________________
How to confirm: Inspect both faces and open selected sections

Acceptance and connection testing are project-defined. Record setup changes before treating a revised trial as the same process.

Sinicwebbing — https://www.sinicwebbing.com