Write a roll-format and packaging specification

Connect quantity rules to downstream handling and verification.

Usable length
Record: Target net length, unit, variation and treatment of unusable ends
Project detail: ____________________
Confirm: Measure agreed receiving sample

Continuity
Record: Minimum continuous length, joins allowed, marking and position record
Project detail: ____________________
Confirm: Inspect roll and label

Measurement
Record: Counter method, measuring tension, leaders and reconciliation rule
Project detail: ____________________
Confirm: Compare buyer and supplier method

Roll geometry
Record: Core size, maximum diameter or handling weight and winding tightness
Project detail: ____________________
Confirm: Trial on rack or dispenser

Direction and protection
Record: Face, unwind direction, edge guards, moisture barrier and restraint
Project detail: ____________________
Confirm: Open trial package

Identification
Record: Item, colour, width, lot, roll ID and measured net length
Project detail: ____________________
Confirm: Reconcile with packing list

Carton total does not replace per-roll requirements. Permitted joins, leaders, variation and measurement rules are project-defined and should be stated before packing.

Sinicwebbing — https://www.sinicwebbing.com