Record a reproducible end condition

Describe the cut, protection and handling at the exact product location.

End location
Record: Exposed, enclosed, folded, sewn or near hardware
Project detail: ____________________
Confirm: Mark it on the assembly drawing

Material build
Record: Fibre or blend, weave, coating and face
Project detail: ____________________
Confirm: Match the piece to its material lot

Cut signature
Record: Method, edge shape, bead and discoloration
Project detail: ____________________
Confirm: Photograph immediately after cutting

End protection
Record: Fold, binding, stitching, cap or coating
Project detail: ____________________
Confirm: Section or unfold a retained sample

Downstream operations
Record: Feeding, folding, needle lines, contact and cleaning
Project detail: ____________________
Confirm: Keep samples after each stage

Acceptance point
Record: Inspection stage and allowed loose-yarn condition
Project detail: ____________________
Confirm: Compare with a signed finished-end sample

Settings and limits depend on material and end use. A stable-looking edge does not prove finished joint strength.

Sinicwebbing — https://www.sinicwebbing.com