Separate surface repellency from assembly water control

The record states the required water behaviour, exact exposure, material treatment, assembly openings and observations before and after use states.

Performance intent
What to record: Surface beading, wetting delay, absorption limit, transfer limit or sealed-assembly requirement
Project detail: ____________________
How to confirm: Approve product-use statement

Webbing reference
What to record: Fibre, construction, width, thickness, treatment or coating, colour, lot and sample code
Project detail: ____________________
How to confirm: Compare retained treated tape

Exposure method
What to record: Water type, spray or immersion, pressure, angle, duration, quantity, temperature and observation times
Project detail: ____________________
How to confirm: Run controlled written method

Assembly details
What to record: Cut ends, heat treatment, folds, seams, stitch holes, hardware, backing and adjacent materials
Project detail: ____________________
How to confirm: Build production-equivalent samples

Use sequence
What to record: Flexing, abrasion, contamination, cleaning, drying, recovery and number of cycles
Project detail: ____________________
How to confirm: Process matched treated and control samples

Observations
What to record: Beading, wetting, mass change, face-to-back transfer, edge and seam entry, stiffness and appearance
Project detail: ____________________
How to confirm: Record zones separately

A surface treatment does not automatically seal yarn paths, cut edges or stitch holes; the buyer must define finished-product acceptance and care durability.

Sinicwebbing — https://www.sinicwebbing.com