Define the usable belt after every component is installed

The record converts body and clothing range into complete-belt geometry, hardware compatibility, tail containment and movement observations.

Fit range
What to record: Target body circumference, clothing allowance, bag width and required minimum and maximum usable settings
Project detail: ____________________
How to confirm: Measure complete fitted bag

Webbing reference
What to record: Fibre, weave, width, thickness, stiffness, finish, colour, lot, face and sample code
Project detail: ____________________
How to confirm: Compare retained production tape

Hardware reference
What to record: Buckle, adjuster and keeper supplier, model, slots, radii, stack capacity and orientation
Project detail: ____________________
How to confirm: Inspect approved production pieces

Belt geometry
What to record: Cut lengths, folds, seam allowances, engaged length, free tail and adjustment reserve at limits
Project detail: ____________________
How to confirm: Measure marked assembly

Tail management
What to record: Keeper count and position, end treatment, stored direction and allowed projection in each setting
Project detail: ____________________
How to confirm: Check through full adjustment

Wear observations
What to record: Buckle and edge contact, pressure, rotation, slip, bunching, bag stability and access while moving
Project detail: ____________________
How to confirm: Fit thin and thick clothing

The buyer must define fit population, loads, movement and comfort acceptance; nominal tape length or buckle width cannot establish the usable belt range.

Sinicwebbing — https://www.sinicwebbing.com