Create a tote handle geometry and carrying record

Connect the handle dimensions to the bag shape, contents and carrying configuration.

Bag reference
What to record: Bag size, wall stack, top closure, representative contents and filled profile
Project detail: ____________________
How to confirm: Prepare an identified filled prototype

Attachment datums
What to record: Four root positions, spacing, insertion depth and reference stitch line
Project detail: ____________________
How to confirm: Mark the complete bag drawing

Handle geometry
What to record: Cut length, finished loop, drop, grip span, face and pair orientation
Project detail: ____________________
How to confirm: Measure from named datums

Grip construction
What to record: Tape width, thickness, edge, fold, cover and seam location
Project detail: ____________________
How to confirm: Build the complete contact section

Carrying states
What to record: Hand or shoulder use, clothing, clearance, access and care/recovery condition
Project detail: ____________________
How to confirm: Operate the same filled bag

Approval evidence
What to record: Dimensions, pressure points, top-edge distortion, pair balance and retained sample
Project detail: ____________________
How to confirm: Compare marked before-and-after records

The buyer defines contents, carrying loads and acceptance. Geometry approval does not establish the strength of the complete bag.

Sinicwebbing — https://www.sinicwebbing.com