Create a repeatable soft-touch reference

The record separates fibre, weave and finish effects and connects them to the actual contact zones of the assembled strap.

Material construction
What to record: Fibre, yarn, weave, width, thickness, edge, finish, colour, lot and sample code
Project detail: ____________________
How to confirm: Inspect retained approved tape

Contact map
What to record: Face, back, edges, folds, seams, ends and hardware zones touching skin or clothing
Project detail: ____________________
How to confirm: Mark complete product drawing

Bending response
What to record: Lengthwise and crosswise direction, bend method, radius or fixture, recovery time and observation
Project detail: ____________________
How to confirm: Compare conditioned marked samples

Assembly build
What to record: Lining, padding, layer order, seam, stitch, fold, reinforcement and end treatment
Project detail: ____________________
How to confirm: Make production-equivalent section

Care state
What to record: Dry baseline, relevant moisture or cleaning, drying method and recovery interval
Project detail: ____________________
How to confirm: Process matched assemblies

Approval reference
What to record: Physical swatch, finished section, viewing and handling method, date and approver
Project detail: ____________________
How to confirm: Seal identified reference set

Soft touch is application-specific and does not establish strength, abrasion resistance or product suitability; the buyer defines those acceptance criteria separately.

Sinicwebbing — https://www.sinicwebbing.com