Write an end-preparation and termination record

The record links rope construction to the finishing method, next assembly step and checks on both visible and hidden regions.

Rope identity
What to record: Fibre, braid, core, size, finish, colour, lot and sample code
Project detail: ____________________
How to confirm: Match approved rope and production lot

Preparation method
What to record: Cut tool, heat or ultrasonic setting, stitch, whipping, adhesive or cap
Project detail: ____________________
How to confirm: Record controlled work instruction

Prepared geometry
What to record: Preparation length, maximum tip profile, taper, exposed picks and hardness
Project detail: ____________________
How to confirm: Measure and inspect marked samples

Termination build
What to record: Sleeve or fitting, insertion depth, fold, stitch or crimp setting and orientation
Project detail: ____________________
How to confirm: Build with production tools

Hidden containment
What to record: Core and cover position before and after assembly, with permitted movement
Project detail: ____________________
How to confirm: Section a retained sample

Finished response
What to record: Bending directions, pull condition, fraying, slip, hard edge and appearance
Project detail: ____________________
How to confirm: Test complete terminations

End preparation alone does not establish termination strength; the buyer must define load, durability and product acceptance for the complete assembly.

Sinicwebbing — https://www.sinicwebbing.com