Specify the rope and the opening as one interface

The schedule connects rope geometry and recovery with hardware clearance, termination size and the product’s real movement.

Rope construction
What to record: Fibre, braid, core, nominal diameter, firmness, finish and sample code
Project detail: ____________________
How to confirm: Inspect approved construction sample

Measured section
What to record: Major and minor axes, tolerance, method, force, relaxation time and positions
Project detail: ____________________
How to confirm: Measure marked relaxed samples

Reel variation
What to record: Outer, middle and inner layer values plus lot and reel identity
Project detail: ____________________
How to confirm: Sample across representative reels

Hardware interface
What to record: Opening shape, minimum dimensions, edge radius, path and orientation change
Project detail: ____________________
How to confirm: Use production fitting or controlled gauge

Finished end
What to record: Sleeve, splice, wrap, seam, ferrule and maximum profile
Project detail: ____________________
How to confirm: Measure production-built termination

Movement and recovery
What to record: Load, speed, cycles, dwell, recovery time, flattening, cover shift and snagging
Project detail: ____________________
How to confirm: Cycle complete assembled interface

Diameter selection is application-specific; where load or safety performance matters, the buyer must define separate strength, durability and product acceptance tests.

Sinicwebbing — https://www.sinicwebbing.com