Record the construction behind the cotton-polyester description

Tie composition to yarn position and product interfaces so later lots reproduce the approved visible and sewing behaviour.

Composition map
What to record: Fibre percentages and where each yarn appears
Project detail: ____________________
How to confirm: Review construction statement against labelled sample faces

Visual layout
What to record: Stripe widths, colour sequence, face, back and edge appearance
Project detail: ____________________
How to confirm: Compare finished-width sample beside bag shell

Conditioned dimensions
What to record: Width, thickness and mass per length in agreed sample state
Project detail: ____________________
How to confirm: Measure several positions by one method

Care response
What to record: Intended wash or cleaning cycle and dimensions before and after
Project detail: ____________________
How to confirm: Treat webbing with representative bag-material stack

Assembly interface
What to record: Fold, seam stack, reinforcement, needle, thread and hardware path
Project detail: ____________________
How to confirm: Sew and thread a production-style section

Approval reference
What to record: Sample code, revision, colour reference and lot linkage
Project detail: ____________________
How to confirm: Seal signed cutting with specification record

Fibre position and treatment route are construction-specific; acceptance limits and care conditions belong to the project.

Sinicwebbing — https://www.sinicwebbing.com