Record the finished phone-lanyard geometry

The sheet keeps wearing format, hardware path, artwork and supply scope together so wrist, neck and crossbody variants cannot be confused.

Wearing format
What to record: Wrist, neck or crossbody style and intended use orientation
Project detail: ____________________
How to confirm: Show front, back and side views on the assembly drawing

Finished measurement
What to record: Defined endpoints, shortest and longest setting, doubled section and free tail
Project detail: ____________________
How to confirm: Measure the complete adjusted assembly from named points

Hardware path
What to record: Slider, clip, ring, connector tab and threading direction with revisions
Project detail: ____________________
How to confirm: Build using the exact approved components

End construction
What to record: Fold direction, layer count, cut-end treatment, seam and transition width
Project detail: ____________________
How to confirm: Open one sample and compare to the drawing

Artwork placement
What to record: Approved face, logo direction, repeat and allowed interruption zones
Project detail: ____________________
How to confirm: Overlay full-scale artwork on both finished settings

Supply scope
What to record: Webbing, cut parts or assembled lanyard and owner of phone-case compatibility
Project detail: ____________________
How to confirm: State every deliverable and approval responsibility in the RFQ

Phone-case inserts and complete-device compatibility remain buyer-controlled unless the project scope and validation responsibility explicitly include them.

Sinicwebbing — https://www.sinicwebbing.com