Record a fair rope-fiber comparison

The comparison must hold construction and assembly conditions visible so fiber is not credited for differences created by braid or termination.

Rope construction
What to record: Fiber, diameter, braid pattern, core, finish and sample code
Project detail: ____________________
How to confirm: Measure and photograph each conditioned candidate

Moisture state
What to record: Drying history, wetting medium, soak or spray sequence and wait time
Project detail: ____________________
How to confirm: Condition candidates together before each comparison

Extension sequence
What to record: Gauge length, applied action, duration, repeats and recovery intervals
Project detail: ____________________
How to confirm: Mark the same span and log length at agreed times

Termination
What to record: Knot, splice or seam geometry, tail length and components
Project detail: ____________________
How to confirm: Build with the intended tools and inspect both ends

Bend interface
What to record: Fitting profile, bend radius, travel and contact direction
Project detail: ____________________
How to confirm: Route each assembly through the same production fitting

Observed changes
What to record: Length, diameter, braid set, stiffness, fuzz and local flattening
Project detail: ____________________
How to confirm: Compare with retained unworked controls by zone

Results apply to the named rope constructions and assembly method; they do not establish a universal ranking for all nylon and polyester ropes.

Sinicwebbing — https://www.sinicwebbing.com