Control the complete leash construction

The record should let a buyer reproduce the exact assembly that was reviewed and distinguish material data from finished-product evidence.

Intended use case
What to record: Product size range, handling context and buyer-defined representative loading
Project detail: ____________________
How to confirm: Link the requirement to the product brief

Clip and swivel
What to record: Part reference, eye dimensions, articulation and finish
Project detail: ____________________
How to confirm: Inspect the actual hardware in every planned direction

Tape construction
What to record: Fibre, weave, width, thickness, face and edge finish
Project detail: ____________________
How to confirm: Identify the production-intent roll or sample lot

Clip joint
What to record: Fold direction, overlap, seam layout and clearance from the eye
Project detail: ____________________
How to confirm: Approve a sectioned drawing and completed joint

Handle joint
What to record: Loop opening, fold stack, padding if used and seam position
Project detail: ____________________
How to confirm: Measure and photograph the finished handle

Assembly evidence
What to record: Loading direction, cycle or pull method, inspection points and failure mode
Project detail: ____________________
How to confirm: Test by the buyer-approved method and retain the sample

Any load values or acceptance limits must come from the buyer’s design and validation process; tape data alone does not set product capacity.

Sinicwebbing — https://www.sinicwebbing.com