Define each section and every moving interface

The brief should separate body-worn, lead and elastic duties while showing how the complete route operates.

Body-worn section
What to record: Wear position, adjustment range, webbing width, thickness, edge, contact face and loose-end control
Project detail: ____________________
How to confirm: Fit the completed belt through all settings

Dog-side lead
What to record: Length range, routing, webbing construction, handle or terminal and ground-clearance concern
Project detail: ____________________
How to confirm: Lay out the complete lead

Connectors
What to record: Part models, fixed or sliding location, rotation, entry angle and neighbouring seams
Project detail: ____________________
How to confirm: Operate production hardware in the route

Elastic section
What to record: Position, relaxed length, buyer-defined extension and recovery, covering and end joints
Project detail: ____________________
How to confirm: Measure the assembled section

Transition zones
What to record: Material change, overlap, fold, stitch layout, bulk and permitted movement
Project detail: ____________________
How to confirm: Build each production transition

Assembly states
What to record: Minimum, reference and maximum settings, representative movement and inspection points
Project detail: ____________________
How to confirm: Record the complete sequence

The buyer defines loads, movement, animal and wearer conditions, and acceptance. Individual webbing data do not establish complete-leash performance.

Sinicwebbing — https://www.sinicwebbing.com