Locate every ridge and channel against its interfaces

Record the relief as measurable geometry tied to a face, datum and finished strap layout.

Base construction
What to record: Fibre, weave, finished width, thickness, edge, stiffness and face
Project detail: ____________________
How to confirm: Retain a marked full-width sample

Relief geometry
What to record: Groove count, spacing, width, depth, ridge profile and direction
Project detail: ____________________
How to confirm: Measure from the stated datum

Hardware mapping
What to record: Part number, slot and bar positions, entry angle, folds and travel range
Project detail: ____________________
How to confirm: Overlay hardware on the drawing

Sewn or printed zones
What to record: Seams, labels, logos, plain margins and allowed crossings
Project detail: ____________________
How to confirm: Build the worst-case crossing

Use and cleaning
What to record: Contact surface, likely debris, cleaning method and drying state
Project detail: ____________________
How to confirm: Run the representative sequence

Assembly acceptance
What to record: Tracking, adjustment, stitch formation, visible relief and surface change
Project detail: ____________________
How to confirm: Inspect the complete strap path

Any holding or adjustment criterion belongs to the exact tape-and-hardware assembly and buyer-defined method; grooves do not create a universal grip claim.

Sinicwebbing — https://www.sinicwebbing.com