Specify the loop inside the garment assembly

Connect garment condition, usable opening and seam stack so the small component does not rely on a nominal cut length.

Garment and location
What to record: Garment type, representative weight, collar or side location, visibility and skin contact
Project detail: ____________________
How to confirm: Review the finished wearing position

Finished opening
What to record: Inside length and width, measurement points, loop projection and relaxed state
Project detail: ____________________
How to confirm: Gauge the sewn garment

Tape construction
What to record: Fibre, weave, width, thickness, edge, hand, face and direction
Project detail: ____________________
How to confirm: Retain an identified tape sample

Anchor stack
What to record: Shell, lining, reinforcement, labels, seam allowance, stitch zone and insertion depth
Project detail: ____________________
How to confirm: Build the full cross-section

Hanging evaluation
What to record: Hanger or hook interface, garment condition, duration and inspection points
Project detail: ____________________
How to confirm: Hang the completed garment

Care approval
What to record: Care method, drying, relaxation, opening, twist, shrinkage and seam appearance
Project detail: ____________________
How to confirm: Compare marked samples before and after

The buyer defines garment condition, hanging sequence and acceptance. Tape strength alone is not a safe hanging rating for the completed garment.

Sinicwebbing — https://www.sinicwebbing.com