Define two faces around one tape

Clarify whether both faces carry controlled logos, one face is primary, or the reverse only needs to be usable.

Face A artwork
What to record: File revision, scale, colours, repeat, reading direction and start datum
Project detail: ____________________
How to confirm: Inspect one labelled full repeat

Face B artwork
What to record: Independent or related design, scale, colours, repeat and reading direction
Project detail: ____________________
How to confirm: Turn over without reversing ends

Construction
What to record: Fibre, weave or print route, finished width, thickness and hand
Project detail: ____________________
How to confirm: Retain an identified trial

Face registration
What to record: Required alignment, acceptable offset and reference points between faces
Project detail: ____________________
How to confirm: Measure from the common datum

Edge treatment
What to record: Edge yarn or print colour, neutral border and permitted reverse show-through
Project detail: ____________________
How to confirm: Review flat and smallest bend

Product orientation
What to record: Hardware route, twists, folds, seams and visible face at each zone
Project detail: ____________________
How to confirm: Build the complete strap layout

“Double-sided” must be defined in the quotation; it can describe several different constructions and approval obligations.

Sinicwebbing — https://www.sinicwebbing.com