Specify branch geometry and the common junction

Record each finished path even when the nominal branches are intended to match.

Coupler layout
What to record: Matched or independent branches, intended movement and buyer-defined requirements
Project detail: ____________________
How to confirm: Review the complete arrangement

Measurement points
What to record: Named centre and dog-side attachment datums for each branch
Project detail: ____________________
How to confirm: Show endpoints on the drawing

Webbing section
What to record: Width, thickness, edge, face and flexibility for each branch
Project detail: ____________________
How to confirm: Inspect relaxed and folded tape

Hardware
What to record: Centre connector, clips, swivels and adjusters, openings and orientation
Project detail: ____________________
How to confirm: Use production-intent parts

Folded joints
What to record: Insertion, fold length, layers, cut end, seam field and clearance
Project detail: ____________________
How to confirm: Build both finished branches

Finished reach
What to record: Left and right attachment-to-attachment length at relevant settings
Project detail: ____________________
How to confirm: Measure the assembled coupler

A swivel influences rotation but does not justify a tangle-free claim; acceptance belongs to the complete coupler.

Sinicwebbing — https://www.sinicwebbing.com