Specify coating interruptions

Connect cleanability to assembly operations that expose the core.

Leash layout
What to record: Handle, snap joint, adjuster if used and visible coated spans
Project detail: ____________________
How to confirm: Mark each zone on a dimensioned assembly drawing

Coated construction
What to record: Base tape, coating reference, texture, finished section and edges
Project detail: ____________________
How to confirm: Retain a labelled physical material sample

Hardware bend
What to record: Part model, slot, smallest radius, wrap direction and layer count
Project detail: ____________________
How to confirm: Build the tightest production-intent interface

Cuts and holes
What to record: Cut method, punched or sewn locations and end treatment
Project detail: ____________________
How to confirm: Prepare representative finished openings and ends

Cleaning exposure
What to record: Dirt, moisture, cleaner, contact time and drying sequence
Project detail: ____________________
How to confirm: Apply the buyer-defined process to the assembly

Inspection outputs
What to record: Wet grip, whitening, cracks, edge lift, residue and exposed core
Project detail: ____________________
How to confirm: Examine inside and outside bends plus hand-contact zones

Project-defined acceptance cannot be predicted from coating colour alone.

Sinicwebbing — https://www.sinicwebbing.com