Specify the camera-to-shoulder path

Connect carrying geometry, surface orientation and each narrowing point.

Equipment and use
What to record: Representative equipment, carry position and settings
Project detail: ____________________
How to confirm: Hang the assembly at agreed settings

Shoulder section
What to record: Width, backing, edge profile and contact length
Project detail: ____________________
How to confirm: Wear the loaded sample over intended clothing

Transition joint
What to record: Shape, overlap, layers, seam and ridge direction
Project detail: ____________________
How to confirm: Build both production-intent transitions

Camera connector
What to record: Tape or tab dimensions, attachment hardware and threading
Project detail: ____________________
How to confirm: Fit the actual connector at both equipment points

Face orientation
What to record: Artwork face, adjuster route and permissible rotation
Project detail: ____________________
How to confirm: Mark faces and photograph the freely hanging strap

Damp contact
What to record: Moisture, companion fabric and inspection points
Project detail: ____________________
How to confirm: Check transfer, residue and roughening after handling

The buyer defines assembly load and acceptance; loose-webbing values cannot rate the finished strap.

Sinicwebbing — https://www.sinicwebbing.com