Specify the whole handle

Connect visible geometry, passage and hidden termination.

Bag and carry state
What to record: Fill, mass distribution, panel shape and handle use
Project detail: ____________________
How to confirm: Lift the finished bag in its representative packed state

Rope construction
What to record: Material, braid, section, compressibility and surface
Project detail: ____________________
How to confirm: Compare conditioned samples and keep a labelled reference

Paired geometry
What to record: Cut length, target drop, grip span and permitted difference
Project detail: ____________________
How to confirm: Measure both handles after seating in the same bag

Pass-through
What to record: Eyelet, rolled edge, washer, backing and panel edge
Project detail: ____________________
How to confirm: Inspect the complete opening from both faces

Hidden retention
What to record: Buyer-designed termination and consumed allowance
Project detail: ____________________
How to confirm: Build it and mark its position behind the panel

Use sequence
What to record: Seating lifts, carrying cycles and observations
Project detail: ____________________
How to confirm: Set remeasurement points for drop, rotation, wear and deformation

The buyer defines acceptance and terminations; diameter alone does not establish performance.

Sinicwebbing — https://www.sinicwebbing.com