Specify carrier geometry

Describe the carried assembly instead of an isolated tape roll.

Bottle range
What to record: Filled weights, shapes and sleeve fit
Project detail: ____________________
How to confirm: Place each agreed bottle in the finished sleeve

Carry geometry
What to record: Hand, shoulder or crossbody use, drop and adjustment
Project detail: ____________________
How to confirm: Photograph short, middle and long settings under load

Usable and hidden length
What to record: Exposed span, folds, buckle path and anchor allowance
Project detail: ____________________
How to confirm: Measure a threaded, sewn sample, not visible spans alone

Tape contact
What to record: Finished width, edge feel, face and shoulder zone
Project detail: ____________________
How to confirm: Wear the loaded sample in the intended contact condition

Hardware path
What to record: Adjuster opening, threading, tail direction and retained length
Project detail: ____________________
How to confirm: Operate production-intent hardware dry and damp

Sleeve anchor
What to record: Seam, reinforcement, fold and layer count
Project detail: ____________________
How to confirm: Cycle the complete anchor and inspect distortion

Buyer-defined comfort follows agreed damp exposure; one material’s water resistance does not describe the carrier.

Sinicwebbing — https://www.sinicwebbing.com