Describe the tape, edge route and feeding system together

A useful binding specification connects finished tape dimensions to the folded production seam.

Finished tape
What to record: Width, thickness, face, edge, finish and roll direction
Project detail: ____________________
How to confirm: Measure relaxed material from the proposed construction

Seam-stack range
What to record: Layer range, foam, reinforcement and seam allowances
Project detail: ____________________
How to confirm: Make labelled cross-sections at critical transitions

Edge geometry
What to record: Straight runs, inside/outside curves, corners and start point
Project detail: ____________________
How to confirm: Mark radii and sequence on the pattern

Feeding setup
What to record: Binder, size, machine, foot and production direction
Project detail: ____________________
How to confirm: Identify the sewn-trial setup

Stitch capture
What to record: Coverage and stitch position on visible and hidden faces
Project detail: ____________________
How to confirm: Open and inspect samples before and after each transition

Join and finish
What to record: Permitted join locations, overlap, cut edge and end treatment
Project detail: ____________________
How to confirm: Build the joint on the actual layered edge

Flat tape width cannot predict folded coverage when seam stack or feed geometry changes.

Sinicwebbing — https://www.sinicwebbing.com