Give each tape a distinct BOM record

The component record should connect function, finished section, surrounding layers and orientation.

Component role
What to record: Adjustment tail, binding, reinforcement or another defined job
Project detail: ____________________
How to confirm: Assign a BOM line and drawing callout

Finished section
What to record: Width, thickness, face, edge and finish for that role
Project detail: ____________________
How to confirm: Measure retained tape from proposed lot

Assembly stack
What to record: Foam, shell, lining, folds and reinforcement overlap by zone
Project detail: ____________________
How to confirm: Draw buckle, body and top-anchor cross-sections

Interface
What to record: Buckle, curve radius, seam pattern, needle and thread
Project detail: ____________________
How to confirm: Build with production-intent parts and equipment

Direction and pair
What to record: Webbing face, logo, tail angle, left or right identity
Project detail: ____________________
How to confirm: Compare a labelled pair against the assembly drawing

Approval state
What to record: Adjustment, edge appearance, sewability and defined load programme
Project detail: ____________________
How to confirm: Record results separately for each component role

A shared width or colour does not show that one construction can perform every role.

Sinicwebbing — https://www.sinicwebbing.com