Record the interface, not only the tape size

A useful specification links finished webbing to the exact adjuster, route and user action.

Adjuster identity
What to record: Model or drawing, material, slot and bar layout
Project detail: ____________________
How to confirm: Measure actual part; retain labelled sample

Finished tape section
What to record: Width, thickness, weave face and edge profile after finishing
Project detail: ____________________
How to confirm: Measure proposed tape relaxed

Routing geometry
What to record: Anchor position, threading path, approach angle and layer count
Project detail: ____________________
How to confirm: Mark route on assembly drawing

Adjustment states
What to record: Loose, worn and project-defined loaded conditions
Project detail: ____________________
How to confirm: Separate pulling from handling

Free-tail finish
What to record: Exposed length, fold, stitch, cap or other end treatment
Project detail: ____________________
How to confirm: Pass production end through required openings

Contact conditions
What to record: Padding, binding, clothing contact, moisture and cleaning relevant to use
Project detail: ____________________
How to confirm: Repeat agreed checks with full stack

Holding acceptance and pull effort are project-defined; a nominal buckle width alone does not establish fit.

Sinicwebbing — https://www.sinicwebbing.com