Define the electrical measurement and the path

The purchase document must make conditioning, contacts and specimen form repeatable.

Measured property
What to record: Resistance, charge-decay or other buyer-selected method and range
Project detail: ____________________
How to confirm: Cite the agreed method and report units

Specimen form
What to record: Loose tape, sewn loop, hardware assembly or completed product
Project detail: ____________________
How to confirm: Draw the exact current or charge path through the specimen

Continuity points
What to record: Conductive yarn placement, seams, coatings, joints and termination
Project detail: ____________________
How to confirm: Check every transition and mark intended contact areas

Conditioning
What to record: Temperature, relative humidity, duration and handling before reading
Project detail: ____________________
How to confirm: Condition all comparison specimens together

Measurement setup
What to record: Electrode type, spacing, pressure, voltage and reading locations
Project detail: ____________________
How to confirm: Photograph the arrangement and label positions

Use history
What to record: Cleaning, flexing or wear state before evaluation
Project detail: ____________________
How to confirm: Apply the agreed sequence and keep untreated controls

The limits and method come from the application; a material reading is not general product-safety approval.

Sinicwebbing — https://www.sinicwebbing.com